EPS (styrofoam) Cold Compactor EPS Densifier Foam Melting Recycle Machine Polystyrene Plastic Brick Block Making Machine for Sale

• Customization: Available
• After-sales Service: Overseas Engineer Available
• Warranty: 3 Years
• Model NO.: ZY-ERM200
• Type: EPS Foam Machine
• Raw Material: EPS
• Principle: Hot Melting
• Automation: Automatic
• Computerized: Computerized
• Certification: CE, ISO9001:2008, QS, GMP, ISO9001:2015
• Selling Units: Single Item
• Single Gross Weight: 68.000kg
• Key Selling Points: High Productivity
• Crusher Motor Power: 2.2kwx4
• Weight (Kg): 1800kg
• Single Package Size: 130X49X49.Cm
• Core Components: Bearing,Pump,Gear,Plcpressure Vessel
• Crusher Blades Quantity: Four Screw11sets+10sets+11sets+10sets
• Place of Origin: Hebei,China
• Screw Distance: 180 mm
• Voltage: 380V/Custom
• Machinery Test Report: Provided
• Crusher Rotation Speed: 100r/M
• Brand Name: Zhenyou
• Capacity: 160-200kg/H
• Transport Package: Plastic Film
• Specification: 22KW
• Trademark: ZHENYOU
• Origin: China
• HS Code: 84778000
• Production Capacity: 3000sets/Year

Product Description

EPS(styrofoam) cold compactor EPS densifier foam melting recycle machine polystyrene plastic brick block making machine for sale
Updated 5:00 PM BJT, Sun. April 27, 2025

Product Description

Technical Parameters		value
Screw diameter	Φ250 mm
Screw distance	180 mm
Screw speed	150 r/min
Capacity	160-200Kg/h
Screen hole diameter	50mm
Extrusion center height	366 mm
Motor power	22KW
Heating power	3 zones total 10kw
Crusher motor power	2.2kwx4
Crusher blades quantity	Four screw 11sets+10sets+11sets+10sets
Crusher rotation speed	100r/m
Weight	1800 Kg

Product Display & Features

 

 

MAIN FEATURES

1. The Hopper

* It is designed as half closed,can stop the material powder comes out when crushin
* You can add an air filter on the top of the hopper(normally no need for the filter)
* The hopper is not high, you can feed the material by hand.
* The hopper can be opened by hand,it is easy for the user to clean the crusher tank.
* There is a safety switch on the hopper, when you open the hopper, all the machine power will be shut. So the user do not

need to worry about the safety.

2. The Crusher:
It's two shaft crusher on this type of machine. One shaft is welded by 9 sets of blades, and the other one is welded by 10 sets of blades. Each blade is interlaced in different angle.
This design can make the blades grab the material,and force the material getting down to the barrel.
Two shafts are driven by two gearbox separately.
There is also a screen at the bottom of the crusher tank to filter the material , this design of blade can crush the
EPS,EPE,XPS….most of the foam material can be crushed by this unit.

3. Melting System and Ingot Extruder :
After the crusher, the material will fall down into the barrel, and in the barrel there is a conical screw, with this design ,the
material can be melted well than the other screw.
There are three ceramic heaters on the screw, each heater separate into two parts, one parts is broken the other is still working.
The heaters can be used for a long time.
In the mold head there are two heating stick bars which is made by stainless steel.
The mold can be open when the user finish one shifting working, it is very convenient for the user to clean the material in the mold head.
There is a steel cover at the head of the mold to prevent the people's hand touching the hot material. The control box is stand on the machine, it is easy for the user to touch the button, and there are two emergency stop, one is on the panel and the other one is on the machine.
Final product , could be loaded into the container directly to sell it. They can also crush it and make the other products. The density can reach 500-600kg/cubic meter, and one 40 feet container can load more than 20 tons material.
This technology can perfectly squeeze high-density EPS ingots, reduce storage space, improve recycling efficiency, and
significantly reduce recycling costs. When the recycler converts its sale into profit, it can increase the profit.

Related Machines

Company Profile

 

FAQ

 

EPS expanded polystyrene thermocol styrofoam hot melt waste foam resin melter recycling production line

Q: Are you a trading company or a manufacture factory ?
A: We are pleased to introduce our company, Our compnay is one of China largest manufacturers of EPS/ PU /Rock WoolProduction Lines .Our factory approved by BV,machines approved by CE & ISO9001 . Welcome to visit us for long business cooperation!

Q: Can your factory customize the machine for clients ?
A: Yes, we can.

Q: What is your payment terms ?
A: By T/T (35% prepayment for confirming the order , 65% balance payment covered before delivery) OR 50% by T/T , 50%
byIrrevocable L/C at sight .

Q: How about after-sales service ?
A: We will send professional engineers to final customer's factory for machine installation , commissioning and carefully working training . The final customer will afford related cost .

Q: How about the installation service ?
A: Our company will send professional engineers to final customer's factory for machine installation , commissioning and carefully working training . The final customer will afford related cost .

Why Choose Us

Contact us